Hybrid ceramic bearings may be less common, but the hybrid ceramic bearing the main configuration is composed of inner and outer rings of bearing steel / stainless steel and +PA66/ stainless steel +2RS/ZZ ceramic ball retainer formed by the combination of. Hybrid ceramic bearing has the following four advantages in the use of process.

(1)、耐温高，陶瓷球热膨胀系数小，在高温环境下不会因为温度的原因导致轴承球膨胀，这样大大提高了整个轴承的使用温度，普通轴承的温度在160度左右，陶瓷球的可以达到220度以上。

(1), high temperature resistance, low thermal expansion coefficient of ceramic ball, not in the high temperature environment because of the temperature causes the bearing ball expansion, thus greatly improving the use of temperature of the bearings, plain bearings and temperature of 160 degrees, Tao Ciqiu can reach above 220 degrees.

(2)、转速高，陶瓷球具有无油自润滑属性，陶瓷球摩擦系数小，所以陶瓷球轴承具有很高的转速.计统计采用陶瓷球的轴承是一般轴承的转速1.5倍以上的转速。

(2), high speed, ceramic ball with oil-free self-lubricating properties, ceramic ball friction coefficient is small, so the ceramic ball bearings with high speed. Bearing statistics with ceramic balls are generally bearing speed more than 1.5 times the speed of.

(3)、寿命长，陶瓷球可以不加任何油脂，也就是说即使油脂干掉，轴承还是可以运作的，这样就避免了普通轴承中因为油脂干掉导致的轴承过早损坏现象的发生.据我们测试以及一些客户的反馈使用陶瓷球后的轴承的使用寿命是普通轴承的2-3倍。

(3), long service life, ceramic ball without any oil, that is to say even if oil bearing or kill, can work, thus avoiding the common bearing occur because of premature bearing grease to kill the damage caused by the phenomenon. According to our test and service life of bearing some customer feedback after use ceramic ball is 2-3 times that of ordinary bearing.

(4)、绝缘.采用陶瓷球的轴承，可以使轴承的内外圈之间绝缘，因为陶瓷球是绝缘体，在轴承的内外圈之间用陶瓷球，就可以达到绝缘的效果.这样就使轴承能够在导电的环境下使用了。这也是混合陶瓷轴承最大的优点。

(4), insulation bearing with ceramic balls, can make the insulation between the inner and outer bearing ring, because ceramic ball is an insulator, in between the bearing outer ring with ceramic ball, can achieve the insulation effect. This makes the bearings can be used in a conductive environment. This is also the largest hybrid advantages of ceramic bearing.